Wall Mounted Propagation Station
Our neat wall mounted propagation station.
Kit includes:
1 x Wall bracket (cool grey or blush pink)
1 x 24mm x 150mm Test Tube
2 x Solid Brass Slot Screws
2 x Red Rawl Plugs
Fixing Steps:
- Place the bracket to the wall/surface ensuring it is level and mark the wall where the fixing holes are.
- Remove the bracket. Using a 5 drill bit drill two holes deep enough for the Rawl plug.
- Once drilled push a Rawl plug into each hole (you may need to use a hammer to lightly tap into place) Ensure that the Rawl Plug is flush with the wall/Surface.
- Line the bracket with the holes and slowly screw them in with a flat head screw driver. Do not use a drill or impact driver as this can break the screw or you may slip and mark the bracket.
- Once fixed remove the tissue from the test tube and feed through the bracket.
- Now you are ready to fill with water and a plant cutting :)
vendor:grow urban
Store Pickup: Collect within 1 hour from our store at 8b St Vincent Street, EH3 6SH.
Local Edinburgh Delivery: Delivery by local courier within 3 days to selected EH postcodes (£5.50 or FREE over £50).
UK Shipping: Delivery by DPD within 3 days to most UK postcodes outside the Local Delivery zone (£6.50 or FREE over £50).
